1. Make the weapon mesh.
2. If you used a bezier curve, then when you're done, click space bar from object mode with it selected and say convert to mesh.
3. highlight your object (or part of it if you have more than one), go to the editing panel.
4. Deselect Double-sided from each piece of your mesh
5. Go to edit mode, select everything
6. In the panel, click object>>normals>>recalcul ate outside
7. Repeat for each piece of mesh.
8. Export to .x (yes I know, this wont go in fable, just listen)
9. Somebody will have to hierarchy it and get a texture map.
10. just so nobody asks, please do not ask how to make new texture and model entries, its not hard.
I wrote, now
Quote:
1. Go to textures.big
2. Rename some other texture and import open your texture with the correct alpha and apply changes.
3. Do the same with a model
4. Put them both in an fmp and close FE
5. Re-open FE and load fmp, and the new texture and model will be at the bottom of the list.
1. After emptying the screen, go to view and click background image, load, then choose a picture of the weapon you want
2. go to top view and add a square, then delete two of the vertices and place one of the remaining on a point on the picture, and the other out of the way.
3. Select both vertices and subdivide.
4. Move the generated point to the next good-looking spot on the picture
5. With that selected still, select the outside vertice also, and subdivide.
6. Continue until you are on your third to last one, then select your outside vertice and move it where you would move the next vertice.
7. Select the first and last vertices and go to mesh>>make edge/face
8. Extrude to half your preferred thickness, then extrude the rest of the way.
9. Select the center vertices on the blade, and scale up.
10. Select the vertices of the handle, go to mesh>>vertices>>seperate.
11. Add a modifier, choose subSurf, turn up the level until it looks close to what you want without too many vertices. Click apply next to the modifier.
12. Modify vertices (using porpotional edit helps) to your liking.
13. Go to object mode, and turn off double-sided on any meshes that are.
14. If black appears on any parts of the mesh, highlight it, go to edit mode, select all vertices, go to mesh>>normals>>recalculat e outside.
15. If there is still black, select those faces and go to mesh>>normals>>flip.
16. If there is still black, then you are missing a piece of mesh. Highlight the vertices around the hole, go to mesh>>vertices>>fill.
17. If black did not appear, then select everything (in object mode) and go to object>>join objects and say yes.
18. Save a backup blender project (you can do this any time )
19. Export to directx, this is NOT fable ready, somebody will have to get it fable ready for you, but people are more willing to help those who already have a model (including me).
1. Select all with the 'A' key, and delete everything.
2. Go to view and choose background image >> use background image >>load and pick the sword you'll be doing.
3. Close the dialog after you see it in the background (you can change the brightness of it by changing the 'blend' option)
4. Make a bezier circle by pressing spacebar and going to add>>bezier>>bezier circle.
5. put a bar at each main point of your weapon (anywhere the curve changes direction)
7. Go down and turn up the bevel depth a little, to give it some sharpness.
8. To lower the poly count you should turn down the DefResolIU number.
9. Go back to object mode, hit spacebar, go to object>>convert object type>>to mesh.
10. Modify vertices to your liking.
For the handle:
11. Do steps 1-7.
12. Turn up the bevel resolution, to give it some roundness.
13. Repeat steps 8-10
For That one thing (see video):
just watch the video, but here is a summary.
extrude and flatten a circle, use proportional edit to make it easier on you when you curve the circle.
Hey your thread on weapons in blender was very helpful. I do have a few questions though.
In general can you explain part 2 alittle more?
After subsurfing how do you retain the edge of the blade?
After the handle is seperated how do you go back and subsurf it? I can't seem to reselect it once in is seperated.
And on another note. Do you or can you make a guide showing me how to give it textures and make it fable ready?
Answer: To retain sharpness of the blade: After you seperate, go back to object mode, select the handle, THEN do the subsurf .
To make it fable ready: you need 3ds max 7, but it's really expensive. There is a tutorial on it here
In part two: Sometimes the blade doesn't turn out quite right, so you might want to grab individual vertices and move them to the correct places. With the whole normals thing, the normals decide where the texture goes, if the normals are reversed in some places, those places will appear invisible. So you need to have them correct. Try going into textured viewport
Warning, this is a spoiler!
to see where you need to fix. Good Luck! if you have more questions please ask :d
Sylhoette wrote on Sun, 18 November 2007 20:11
Quote:
...Is there a place in blender that will give you the thickness of the obj. and if so what should it be?
aah, that is a VERY good question, and should be put in my tutorial right away, when you scale an object, just like when you move it around, clicking and holding the middle mouse button resticts it to certain axis' right? well, doing that while scaling makes it only scale one direction, or you can do this automatically by clicking on the blue square icon (see pic) and clicking and dragging the different axis'.
pic
Warning, this is a spoiler!
Random Tips
Warning, this is a spoiler!
1. When you create a new mesh on the screen, don't forget that depending on how big or small you want it, be it a circle, a cone, or anything, you can tell it how many polys to have (not directly, it will have a slider for how many lines or vertices in each direction)
2. If flipping normals does not make you able to see a part of the mesh, there is probably nothing there, in which case you'll need to go into edit mode, select the vertices surrounding the hole, and hit the f key, just make sure you only select where one face would normally go, otherwise it will look a little funky and be hard to edit later it the need comes across.
3. Try to make sure you are not doubling vertices, if you find that two vertices are VERY close to each other, and should be inside each-other, select both, hit the w key, and click merge>>at center.
4. When you scale an object, just like when you move it around, clicking and holding the middle mouse button resticts it to certain axis' right? well, doing that while scaling makes it only scale one direction, or you can do this automatically by clicking on the blue square icon (see pic) and clicking and dragging the different axis'.
ok so I've been trying like H*** to make a rifle. I have been trying to use the crossbow mesh but I've never used blender before this on direct x files. so I added a cylinder for a barrel but when I export it the cylinder separates from the rest of the bow. also blender wont let me get rid of the "arms" of the bow.but here are some screenies:
Warning, this is a spoiler!
Warning, this is a spoiler!
any help at all would be appreciated.
P.s. I got it to save properly as a .blend but it still separates my mod from the base.
)
